Absolutely, One of the vital automations to a maritime vessel is the Marine Power Management Safety (PMS).
Definitely, the Marine Power Management Safety (PMS) is monitoring the MSB & providing safety & control over the generators & consumers.
Exclusively, how to establish & retrofit it to switch professionally to a Marine Power Management System implementation, has been demonstrated here.
As a matter of fact, the Marine Power Management System retrofit project (PMS-ZMZ-002581 series) is consisting of the several hardware.
Certainly, these hardware, including the PLC, synchronization units, the load sharing, parallel load monitoring, generators & circuit breakers.
Undoubtedly, an intelligent PMS software is working in the back-ground to monitor the safety & control the MSB safely.
Incontestably, the safety is implementing under supervision & as part of the PLC software (R.A.Sh.B.M. PMS-ZMZ-002581).
Supposed, you as an reputable owner have got an obsolete marine vessel comprising an out of order main-switchboard.
Obviously, this MSB is suffering from lack of an efficient power management system.
Moreover, lack of any types of automation to control the Generator’s ACB(s) and providing safety is obvious.
Incontrovertibly, the captioned safeties over the engine and switchboard itself are determinative.
Here, we’ve brought about an cutting-edge solution (zmz002581 PMS automations).
Patently, this product establishes over the siemens plc marine-approved type to resolve class concerned safeties.
Needless to say that, the SIEMENS based PMS provides the final solution & maintain a hassle-free operation.
ABB motorized ACB
Positively, in the attached video, the benefits of the Marine Power Management Safety are cleared.
Unmistakably, the PMS-ZMZ-002581 Marine Power Management System Retrofit Project implements over marine approved platform.
Obviousely, the PMS is commissioned over a fully manual platform and has brought about a versatile remote-control and safety .
Simultaneously, safeties are establishing over the MSB & on the Generators to provide parallel-running modes of the GENSET (s).
Unquestionably, a fully automatic-synchronization & load sharing ability is performing as long as the safeties.
#RASHBM PMS actuators & sensors retrofit over Generator
Simply, by touching the imaginary buttons of the Air Circuit Breakers, over the HMI, the “Auto-Synchronization” process initiates.
Certainly, the in-coming generator is paralleling to the out-going generator by means of the Marine Power Management Safety.
Unfortunately, even the ACB (s) are sometimes obsolete, and no any motorized gear are applicable to them.
Beyond any doubt, we’ve replaced those out of order ACB(s) with the Motorized ACB(s) from ABB.
Due to lack of safety over the main switch board, we’ve installed several electronic current & voltage transducers.
For sure, these transducers shall provide monitoring function through the PLC over the MSB.
Assuredly, the current direction of the generators shall provide the “Reverse Power Protection” safety.
Other relevant parameters like the frequency monitor (including the safeties) are being provided under PROFINET network.
